Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program a New Remote for a Citroen C1?

Model: Citroen C1 MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Key

See other generations:
Video tutorial

In this tutorial, you will learn how to program a new remote for a Citroen C1. Start by entering the cabin, then open the driver's door, insert the new key, and quickly turn the ignition on and off. Next, close and open the door twice in succession, turn the ignition on and off again, and repeat the operation with the door, this time keeping it closed.

At this point, lock the door using the internal button and unlock it after turning the ignition on and off two more times.

Finally, remove the key, hold down both buttons, and complete the operation by pressing just one of them.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Program the Key for Citroen C1 - Peugeot 107 - Toyota Aygo
How to Program the Key for Citroen C1 - Peugeot 107 - Toyota Aygo
Citroen C1 (2005-2014 / MK 1) In this brief and simple guide, you will see the steps to program the remote key for the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. Firs…
How to Program the Key of the Citroën C1?
How to Program the Key of the Citroën C1?
Citroen C1 (2014-2022 / MK 2) To program the key of the Citroën C1, insert the blank key into the corresponding ignition barrel. At this point, connect a diagnostic tool to the ve…
How to Replace the Remote Battery on the Citroën C1
How to Replace the Remote Battery on the Citroën C1
Citroen C1 (2005-2014 / MK 1) To replace the remote battery on the Citroën C1, you need to loosen the screw located at the back of the device, just below the keyring: once this sc…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos