Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Fuse in the Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Fuse box

To replace a 30A fuse in the Citroen Xsara Picasso, open the bonnet. Just behind the driver's side headlamp (for left-hand drive), locate the fuse box and remove the cover by pressing the tabs. Once the cover is off, note that the 30A fuse is not directly above but on the side. Disconnect all connectors and the bolt that holds it in place, then lift it out. On the left side, you will find the fuses with a higher amperage. Remove the fuse, replace it (the video also shows a repair), and once replaced or repaired, put it back in place of the damaged fuse. Then, reposition the fuse box, reattach the bolt, reconnect the connectors, replace the cover, and close the bonnet.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Location of the Front Windscreen Wiper Fuse on the Citroen Xsara Picasso
Location of the Front Windscreen Wiper Fuse on the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) If the front windscreen wipers on the Citroen Xsara Picasso suddenly stop working, the cause may be the intervention of the corresponding fuse. To ch…
Where is the windshield wiper fuse located in the Citroen Xsara Picasso?
Where is the windshield wiper fuse located in the Citroen Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) If the windscreen wipers of our Citroen Xsara Picasso have suddenly stopped working, we can first of all check the status of the corresponding fuse, …
How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos