Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Front Windscreen Wiper Fuse on the Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Windshield wipers

If the front windscreen wipers on the Citroen Xsara Picasso suddenly stop working, the cause may be the intervention of the corresponding fuse. To check this, open the panel covering the fuse box located on the left, at the bottom of the steering column. To identify the correct fuse, consult the diagram found in the owner's manual. The windscreen wiper fuse is the second from the right in the bottom row and is white in colour. Remove it using the designated tweezers and replace it with a new one with similar characteristics.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the windshield wiper fuse located in the Citroen Xsara Picasso?
Where is the windshield wiper fuse located in the Citroen Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) If the windscreen wipers of our Citroen Xsara Picasso have suddenly stopped working, we can first of all check the status of the corresponding fuse, …
Replacing Headlight Bulbs on Citroen Xsara Picasso
Replacing Headlight Bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the front headlight bulbs of your Xsara Picasso blown and need replacing? Here’s how to remove them. Open the front bonnet by pulling the lever l…
Where are the Fuses in the Citroen Xsara Picasso?
Where are the Fuses in the Citroen Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) Although there is only one official model of the Citroen Xsara Picasso, the fuse layout is not the same for all vehicles in this line. It changes bas…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos