Do it yourself
| ||||
|
Citroen Xsara Picasso - Video tutorial
Model: Citroen Xsara Picasso
MK 1
- Years 1999-2012 If the cabin fan of our Citroen Xsara Picasso has suddenly stopped working, the first thing we can do is check the status of the respective fuse whose location is indicated in this video. As shown, the fuse in question is located in the box inside the cabin, precisely behind the small panel located in the lower left area of the dashboard, on the driver's side. It is labeled with the code F40 and is 40A. If it is faulty, make sure to use a replacement with equivalent characteristics and operate with the vehicle turned off.
Posted on 16 April 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsReplace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.017
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |