Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Heating Fan on a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Blower motor

Let's see how to remove the heating fan on a Citroen Xsara Picasso. Remove the plastic covering from the central tunnel (located under the central tunnel on the left). Unscrew the securing screws with a screwdriver; remove the black plastic cover that hides the heating fan. Once these steps are complete, unscrew the ventilation fan and disconnect the power connector. Remove the ventilation fan from its housing. Reverse the process to install the new ventilation fan. Test the fan's operation.

Updated on 14 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the front passenger seat of your Citroen Xsara Picasso. Start by removing the glove compartment by unscrewing the relevant b…
Citroen Xsara Picasso (1999-2012 / MK 1) Before you can start, sit in the front passenger seat. Begin by unscrewing the screws that secure the glove compartment to the dashboard, then remove…
Citroen Xsara Picasso (1999-2012 / MK 1) Discover how to remove and replace the cabin heater radiator on the Citroen Xsara Picasso by following the instructions below. First, open the bonnet…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos