Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the diesel filter on a Citroën C4 Picasso?

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Diesel fuel filter

To replace the diesel filter on a Citroën C4 Picasso, open the bonnet to access the components inside the engine bay. Detach the plastic cover from the top of the engine block. This will allow you to locate the filter at the rear of the engine. Loosen the central nut securing it at the top and disconnect the fuel lines. You can then replace the old filter with a new one. After installation, cover everything back with the plastic cover.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fuel Filter on Citroen C4 Picasso
Replacing the Fuel Filter on Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Want to replace the fuel filter without going to a garage? Let’s see how to replace the fuel filter on a C4 Picasso. Lift the bonnet and secure it, t…
How to Replace the Diesel Filter on the Citroen C4 Grand Picasso 2 1.6 eHDI
How to Replace the Diesel Filter on the Citroen C4 Grand Picasso 2 1.6 eHDI
Citroen C4 Picasso (2013-2022 / MK 2) In today's tutorial, you will see how to remove and replace the diesel filter on the second generation Citroen C4 Grand Picasso with a 1.6 eHDI engin…
Replacing the Diesel Filter on Citroen C4 Picasso
Replacing the Diesel Filter on Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Today, let’s see how to replace the diesel filter on a second-generation Citroen C4 Picasso. Start by opening the engine bay and removing the engine …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos