Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Fuse Boxes in the Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuse box

See other generations:
Video tutorial

When searching for the source of an electrical system malfunction or one of its components, it is useful to know where the fuse boxes are located to carry out necessary checks and any replacements of damaged elements. The first box is found in the dashboard, at the bottom under the steering wheel, protected by a panel that can be removed by acting on the two handles.

The second is located in the engine bay, on the driver's side, next to the battery, covered by a black plastic lid. To identify the fuse to check, consult the attached installation diagram.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

Location of the Fuse Boxes on the Citroen Berlingo
Location of the Fuse Boxes on the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) When working on an electrical component of the Citroen Berlingo, it is useful to know where the fuse boxes are located to carry out necessary checks …
Location and Diagram of the Fuse Boxes of the Citroen Berlingo
Location and Diagram of the Fuse Boxes of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) In this guide, learn about the positioning and diagram of the fuse boxes of the Citroen Berlingo by following these simple steps. First, locate the i…
Where Are the Fuses on a Citroën Berlingo?
Where Are the Fuses on a Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) The fuses on a Citroën Berlingo are housed within designated fuse boxes installed in the vehicle: this model has two fuse boxes. The first is located…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos