Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Position Lights on Fiat Ducato, Peugeot Boxer, Citroen Jumper

Model: Citroen Citroen Various
Part: Headlight

In this video, you will learn how to change the position light bulb on the Fiat Ducato, Peugeot Boxer, and Citroen Jumper (the procedure is the same for all three vehicles). You will need to remove the front screw, which is fixed to the bumper and holds the headlamp unit, and the rear screw that is anchored to the bodywork. Now the headlamp is free, and you can lift it. Remove the rubber cap covering the position light bulb, disconnect the electrical connector, and take out the bulb by turning it a quarter turn and pulling it towards you. Replace it and reassemble everything in reverse order.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the EOBD Port on Fiat Ducato, Peugeot Boxer, and Citroen Jumper?
Where is the EOBD Port on Fiat Ducato, Peugeot Boxer, and Citroen Jumper?
Citroen Citroen Various In this video, see where the EOBD port is located on some commercial vehicles that share many construction features: the Fiat Ducato, Citroen Jumper,…
How to replace the clutch on a Citroen Relay - Peugeot Boxer - Fiat Ducato 2.2
How to replace the clutch on a Citroen Relay - Peugeot Boxer - Fiat Ducato 2.2
Citroen Citroen Various Today's main steps will show you how to dismantle and replace the clutch on the Citroen Relay 2.2 HDI, as well as on the Peugeot Boxer and Fiat Ducat…
How to Install Mirror Protectors on Fiat/Peugeot/Citroen Vans
How to Install Mirror Protectors on Fiat/Peugeot/Citroen Vans
Citroen Citroen Various In this video, we look at an interesting accessory that can be fitted to the external mirrors of Fiat/Peugeot/Citroen vans, which significantly helps…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos