Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program a New Key in the Citroen DS3?

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Key

In this tutorial, you will see how to program a new key in the Citroen DS3, a very simple and quick operation. You will need the scanner shown in the video, which can be easily found online. Start by connecting the scanner to the OBD port, accessible from the glove compartment on the passenger side. Then, interface it with the car and turn the key to the second position. Next, go to the "Program key" section, enter the vehicle's PIN code, obtainable using the same scanner, and follow the instructions displayed.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Citroen DS3
How to replace the front headlight bulb of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) If one of the bulbs in the front headlight of your Citroen DS3 has suddenly stopped working and you want to find out how to replace it correctly, the…
How to replace the battery of the Citroen DS3 key
How to replace the battery of the Citroen DS3 key
Citroen Ds3 (2010-2019 / MK 1) To carry out the replacement of the battery located in the key of your Citroen DS3, you only need a new CR2032 battery and a flat screwdriver prefera…
How to replace the battery of the Citroen DS3 key
How to replace the battery of the Citroen DS3 key
Citroen Ds3 (2010-2019 / MK 1) If the key of your Citroen DS3 has suddenly stopped working and you want to find out how you can replace the small battery inside it, then all you ha…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos