Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Valve Cover Gasket

Model: Citroen Zx MK 1 - Years 1991-1998
Part: Engine

To replace the valve cover gasket, start with a thorough cleaning of the gasket seat, both under the cover and on the cylinder head, to remove any dirt residue. Once cleaning is complete, insert the new gasket into the groove along the edge of the cover and, without applying sealant, position the cover on the cylinder head, tightening the securing bolts with a torque wrench in a cross pattern to ensure the gasket adheres perfectly.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen Zx (1991-1998 / MK 1) If there have been issues with coolant boiling, the most likely cause is damage to the cylinder head gasket. Once the cylinder head is removed, it is…
Citroen Zx (1991-1998 / MK 1) When performing a complete overhaul of the cylinder head, it is important to machine the surface to eliminate any warping; after this operation, it i…
Citroen Zx (1991-1998 / MK 1) Before applying the new set of bolts, check the thread pitch with the appropriate thread gauge and select the tap to re-thread all holes, taking care…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos