Do it yourself
Frequently asked questions about cars and motorcycles

Citroen Zx - Videoguide

Citroen Zx (1991-1998 / MK 1)
Replacing the tappet cover gasket

If the tappet cover gasket has to be replaced, start with a thorough cleaning of the gasket seat, both under the cover and on the cylinder head, in order to …read all…
Posted on 31 August 2023 by ScegliAuto
Citroen Zx (1991-1998 / MK 1)
Camshaft oil seal replacement

When carrying out engine maintenance that requires the disassembly and removal of gaskets and oil seals, it is always advisable to replace them with new ones …read all…
Posted on 17 August 2023 by ScegliAuto
Citroen Zx (1991-1998 / MK 1)
Valve guide rubbers replacement

When carrying out a repair that requires disassembly of the cylinder head, it is good practice to replace the valve guide rubbers which are real oil seals: in …read all…
Posted on 15 August 2023 by ScegliAuto
Citroen Zx (1991-1998 / MK 1)
Replacement of automobile manifold gasket

The exhaust manifold connects a part of the car to the muffler. Its function is to connect the gases produced by the combustion of fuel from the cylinders to …read all…
Posted on 10 August 2023 by ScegliAuto
Citroen Zx (1991-1998 / MK 1)
Complete overhaul instructions tested

When carrying out a complete overhaul of the cylinder head it is important to rectify the surface to eliminate any deformations; after this operation it is …read all…
Posted on 6 August 2023 by ScegliAuto
Citroen Zx (1991-1998 / MK 1)
Replacement of cylinder head fixing pins

Before applying the new set of pins, check the thread pitch with the appropriate thread counter and select the tap to go over all the holes, taking care not to …read all…
Posted on 4 August 2023 by ScegliAuto
Citroen Zx (1991-1998 / MK 1)
Camshaft replacement

In this tutorial, a new camshaft is fitted to a Citroen Zx. The camshaft transforms the vertical action of the pistons into the circular movement that makes …read all…
Posted on 4 August 2023 by ScegliAuto
Citroen Zx (1991-1998 / MK 1)
Replacement exhaust manifold gasket

If the exhaust manifold gasket has to be replaced, the surfaces must first be carefully cleaned in order to remove any residue of encrustation that could …read all…
Posted on 4 August 2023 by ScegliAuto
Citroen Zx (1991-1998 / MK 1)
Head gasket replacement

If coolant boiling problems have occurred, the most likely cause is damage to the cylinder head gasket. Once the head itself has been disassembled, it is …read all…
Posted on 3 August 2023 by ScegliAuto
Engine (8) Valve (1)

How do I unlock the automatic transmission of the BMW 3 Series?

In order to unlock the automatic transmission of the BMW 3 Series, the Start / Stop button and the lever release button must be pressed at the same time. This procedure will allow the car gearbox to be unlocked for about 15 minutes, so that in the event of an engine failure, the car can still be moved. It may be necessary to repeat the operation more than once for its success. After unlocking the gearbox, it can return to its original state by simply waiting for the aforementioned 15 minutes, or by pushing the release lever forward for a few seconds.

Watch the video!


by ScegliAuto

More videos