Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the headlamp bulb on a Citroen DS3

Model: Citroen Ds3 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

When the headlamp bulb on a Citroen DS3 burns out, you must replace it as soon as possible. Open the bonnet, position yourself in front of the headlamp containing the bulb to be replaced, and remove the rubber protective cap. Release the metal clip that secures the bulb in place, remove it, and disconnect the electrical connector.

Fit the new H7 bulb onto the connector, taking care not to touch the glass with bare fingers. Insert it into its housing, ensuring the tabs are in the correct position, and secure it with the metal clip.

Replace the rubber cap in its place.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

How to replace the front headlight bulb of the Citroen DS3
How to replace the front headlight bulb of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) Replacing the headlight bulb of your Citroen DS3 is undoubtedly one of the simplest maintenance operations you can do on your own. First, park the ca…
How to Change the Cabin Air Filter of the Citroen DS3
How to Change the Cabin Air Filter of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) In the following guide, we explain the steps you need to take to independently replace the cabin air filter in your Citroen DS3 first series. First, …
Where is the OBD2 port located in the Citroen DS3?
Where is the OBD2 port located in the Citroen DS3?
Citroen Ds3 (2010-2019 / MK 1) To easily locate the OBD2 port inside your Citroen DS3, you need to carefully follow the steps described below and apply them step by step. First of …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos