Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Cabin Air Filter

Model: Citroen C2 MK 1 - Years 2003-2010
Part: Cabin air filter

Lift the bonnet of the engine compartment. Locate the position of the filter, which is situated in a black plastic housing near the windscreen (housing indicated in the photo with number 1). Remove the cover of the plastic housing. Once opened, rotate the plastic base around the pins, indicated in the figure by number 4, of the filter and extract it. At this point, you can insert the new filter into the same housing from which you extracted the old one. The filter should be replaced approximately every 9,000 miles or at least once a year. The car is a Citroen C2.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Citroen C2 (2003-2010 / MK 1) The cabin air filter is not located inside the vehicle but in the engine bay, just below the windscreen, on the passenger side. It is practically in …
Complete service guide for the Citroen C2
Complete service guide for the Citroen C2
Citroen C2 (2003-2010 / MK 1) The YouTuber who created this video shows us the complete procedure for performing a service (now commonly referred to as a service) on a Citroen C2.…
How to change the car radio and how to install a stereo in a Citroen C2
How to change the car radio and how to install a stereo in a Citroen C2
Citroen C2 (2003-2010 / MK 1) Changing the car radio on the Citroën C2 is a fairly simple operation, you just need to have a bit of skill. Start by removing the front panel of the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos