Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on the Citroen C2

Model: Citroen C2 MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine oil

Video tutorial

In this video, you will see the steps to replace the engine oil and oil filter, performing the routine maintenance service on the Citroen C2. First, lift the vehicle and remove the oil drain bolt, allowing the old oil to drain into a container for about ten minutes; then, open the bonnet and remove the oil filter using a 27 mm socket, replacing the internal cartridge with the new one. At this point, pour in the new oil, following the video to the end!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace the Gearbox Oil on a Citroën C2?
How to Replace the Gearbox Oil on a Citroën C2?
Citroen C2 (2003-2010 / MK 1) To replace the gearbox oil on a Citroën C2, lift the car to access its underside. Once the car is lifted, position a container under the gearbox, whi…
How to replace the front brake pads of the Citroen C2.
How to replace the front brake pads of the Citroen C2.
Citroen C2 (2003-2010 / MK 1) Today we will see step-by-step instructions on how to disassemble and replace the front brake pads of the Citroen C2. First, we lift the vehicle and …
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Citroen C2 (2003-2010 / MK 1) Using a ratchet spanner, gently unscrew the oil filter and remove it from its housing. Replace the used cartridge with a new one. Lift the car with a…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos