Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Citroen C2 MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine oil

Video tutorial

Using a ratchet spanner, gently unscrew the oil filter and remove it from its housing. Replace the used cartridge with a new one. Lift the car with appropriate jacks and secure it with suitable supports to prevent it from falling.

Place a plastic sheet and an oil collection bowl under the engine. Unscrew the oil cap on the sump and allow the oil to drain.

Close the oil cap, refit the oil filter, and top up with new oil. Do not dispose of used oil in the environment; take it to designated collection centres.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Complete service guide for the Citroen C2
Complete service guide for the Citroen C2
Citroen C2 (2003-2010 / MK 1) The YouTuber who created this video shows us the complete procedure for performing a service (now commonly referred to as a service) on a Citroen C2.…
How to Change the Engine Oil and Oil Filter on the Citroen C2
How to Change the Engine Oil and Oil Filter on the Citroen C2
Citroen C2 (2003-2010 / MK 1) In this video, you will see the steps to replace the engine oil and oil filter, performing the routine maintenance service on the Citroen C2. First, …
Changing the Cabin Air Filter
Changing the Cabin Air Filter
Citroen C2 (2003-2010 / MK 1) Lift the bonnet of the engine compartment. Locate the position of the filter, which is situated in a black plastic housing near the windscreen (housi…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos