Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Light on a Citroën C4 Cactus?

Model: Citroen Cactus MK 1 - Years 2014-2020
Part: AdBlue warning light

To reset the AdBlue light on a Citroën C4 Cactus, first top up the additive liquid in the designated tank, which is vented next to the fuel tank. After the additive liquid has been added, if the light remains on, you will need to reset it using an OBD scanner. This must be connected to the corresponding port located at the bottom left of the steering column. By selecting the car model and following the procedure shown in the video, the light will be completely reset.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the AdBlue Warning Light on a Citroen C4 Cactus?
How to Remove the AdBlue Warning Light on a Citroen C4 Cactus?
Citroen Cactus (2014-2020 / MK 1) If the AdBlue warning light has illuminated on the dashboard of your Citroen C4 Cactus, it means that you need to top up the emissions fluid as it ha…
How to Top Up AdBlue on a Citroën C4 Cactus?
How to Top Up AdBlue on a Citroën C4 Cactus?
Citroen Cactus (2014-2020 / MK 1) To top up AdBlue on the Citroën C4 Cactus, open the rear hatch of the car to access the components inside the boot: here you can lift the carpet that…
Why Is the AdBlue Warning Light On in a Citroen C4 Cactus?
Why Is the AdBlue Warning Light On in a Citroen C4 Cactus?
Citroen Cactus (2014-2020 / MK 1) If the AdBlue warning light has illuminated on the dashboard of your Citroen C4 Cactus, it means that the emissions fluid has reached a too low level…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos