Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C5
    4. : How to install LED bulbs in the front headlight of a Citroen C5 X7.

Citroen C5 - Video tutorial

Model: Citroen C5 RD, MK 2, X7 - Years 2008-2017
Part: Headlight bulb
Operation: How to install LED bulbs in the front headlight of a Citroen C5 X7.

In this video tutorial, we can see how it is possible to install LED bulbs in the front headlight of a Citroen C5 X7. The first thing to do is to purchase a pair of LED bulbs from an authorized auto spare parts dealer. To do this job, you will need a T40 Torx key. To unscrew the bulb, you need to pass by the battery and make your way to the bulb, then insert your hand and unscrew the bulb using the T40 Torx key; at this point, the bulb should come out. Once the bulb is removed from its socket, insert the new LED bulb and screw it into place using the T40 Torx key. The bulbs need to be inserted correctly as they have polarity, so check if the new bulb works, if it doesn't work, remove it and rotate it 180 degrees, then reposition the bulb inside the headlight; at this point, it should work properly.


Posted on 8 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos