Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Service warning light

If the maintenance (or service) light with a small spanner symbol lights up on the instrument cluster of your Citroen C3 first generation (2002-2009) and you want to reset it manually, simply follow these steps. First, get in the car, close all the doors properly, and ensure that the cluster is off. At this point, insert the key and start the cluster. At the same time, press and hold the "ODO" button located on the lower right side of the cluster. Wait for ten seconds, then release the button, and you are done.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light of the Citroën C3?
How to Reset the Service Light of the Citroën C3?
Citroen C3 (2009-2016 / SC) To reset the Service light of the Citroën C3, press and hold the button located at the bottom right of the speedometer. While holding it, turn the ke…
How to Reset the Service Light on the Citroën C3?
How to Reset the Service Light on the Citroën C3?
Citroen C3 (2016-2023 / SY, SX) To reset the Service light on the Citroën C3, press and hold the button located at the bottom of the instrument panel on the left. While holding it d…
How to Reset the Service Light on a Citroen C3
How to Reset the Service Light on a Citroen C3
Citroen C3 (2016-2023 / SY, SX) Today, you will learn the steps to reset the service light on the Citroen C3. To reset, press the button with the spanner symbol on the instrument pa…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2016-2023 - What does the illumination of the Service warning light mean in the Citroen C3? Read answer
    • C3 2002-2009 - How to reset the "Service" warning light on a Citroen C3? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos