Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight of a 2008 Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Headlight

Today, you will learn how to remove the right and then the left front headlight of the 2008 Citroen C3. The steps are quite simple: First, open the bonnet and remove the screws securing the front bumper. Once the bumper is removed, it will be easier to take out the headlights. The second step is to remove the two screws located at the bottom of the headlight using a 10 mm Torx spanner. The third step is to remove the upper screws and then extract the headlight from its housing, making sure to disconnect it from its connector first. Now, perform the same procedure for the right headlight.

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on Citroen C3
Replacing Front Headlight Bulb on Citroen C3
Citroen C3 (2002-2009 / FC, FN) Replace the blown bulbs in the front headlight of a Citroen C3. Open the front bonnet and secure it. Remove the plastic cover to access the front hea…
How to Replace the Number Plate Bulb on a Citroën C3?
How to Replace the Number Plate Bulb on a Citroën C3?
Citroen C3 (2009-2016 / SC) To replace the number plate bulb on a Citroën C3, pry with a tool in the groove between the light above the number plate and its housing. Once the li…
How to Remove the Stop Bulbs on Citroen C3
How to Remove the Stop Bulbs on Citroen C3
Citroen C3 (2002-2009 / FC, FN) Replacing the blown bulbs of the front headlamp on Citroen C3. Here’s how to disassemble the headlamp. Open the boot lid, unscrew the securing screws…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos