Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Saxo
    4. : How to set the time on the Citroen Saxo

Citroen Saxo - Video tutorial

Model: Citroen Saxo MK 1 - Years 1996-2004
Part: Checks and maintenance
Operation: How to set the time on the Citroen Saxo

In this video, it is shown how to adjust the time on the Citroen Saxo. To adjust the time, first start the instrument panel by turning the key to position 2, then press and hold the button on the panel until the time starts flashing. When it starts flashing, release the button and press the button to adjust the hour. Once the time is adjusted, wait for the minutes to start flashing and adjust them by pressing the button, just as done for the hour. Once the time is adjusted, wait for it to stop flashing. At this point, the procedure will be complete and the time will be adjusted.


Posted on 25 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Saxo 1996-2004 - What problems does the Citroën Saxo have when starting? Read Answer
    • Saxo 1996-2004 - What are the lights on the Citroën Saxo? Read Answer
    • Saxo 1996-2004 - Where is the lever to open the hood of the Citroà «n Saxo? Read Answer
    • Saxo 1996-2004 - How do you replace the ignition lock on the Citroà «n Saxo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos