Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Citroen C4 Picasso

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Front bumper

Today, discover the procedure for removing and replacing the front bumper of the Citroen C4 Picasso. First, open the bonnet of the vehicle and start unscrewing all the fastening screws located above and below the front bumper, using a T15 Torx spanner; then unscrew the additional screws located on both sides of the front wheel arches, as shown in the video. At this point, gently unclip the bumper from the sides until it is completely removed, replacing it with a new one if necessary; refit and secure the front bumper with its screws!

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper on a Citroen C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) In this tutorial, see how to replace the front bumper on a Citroen C4 Picasso, a very simple and quick operation. First, open the bonnet, then locate…
Guide to disassembling the front bumper of the Citroen C4 Grand Picasso
Guide to disassembling the front bumper of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Today we will see the main instructions that will allow us to disassemble and remove the front bumper of the Citroen C4 Grand Picasso. First, open th…
Removing the Front Bumper of a Citroen C4 Picasso
Removing the Front Bumper of a Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Follow these steps to remove the front bumper of a Citroen C4 Picasso. Lift the bonnet and secure it. Using a battery-powered screwdriver or a screwd…

Other guides you may be interested in

    Frequently Asked Questions

    • C4 Picasso 2006-2013 - How do you remove the front bumper of the Citroà «n C4 Picasso? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos