Do it yourself
| ||||
|
Citroen Ds3 - Video tutorial
Model: Citroen Ds3
MK 1
- Years 2010-2019 Today with the support of this short video tutorial, we will explain how to reset the maintenance or service light of the 2010 Citroen DS3. We start the reset procedure by pressing and holding the button on the right side of the instrument panel for a few seconds while simultaneously turning on the ignition. After a few seconds, you can stop pressing the button and turn off the instrument panel as the reset will have been successfully performed. It is important to reset the light only if you have had the car serviced or have serviced it yourself, otherwise you will damage the car earlier than expected.
Posted on 11 April 2024 by ScegliAuto
|
Frequently Asked QuestionsHow to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |