Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the instrument cluster display of the Citroen C4 Picasso

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Instrument cluster

Today's guide will show us the main steps on how to disassemble and replace the display of the instrument panel of the Citroen C4 Picasso and Grand C4 Picasso. First, we get on board the car and start by removing the plastic cover found under the panel, levering on the sides with something thin; then we unscrew the screws of the instrument panel, disconnecting the electrical connector to remove it, as shown in the video. At this point, we replace and install the new display of the panel, making the electrical connection, applying the reverse process of disassembly!

Posted on 22 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Fuse Diagram for the 2011 Citroen C4 Picasso
Fuse Diagram for the 2011 Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) This video provides the fuse diagram for the 2011 Citroen C4 Picasso, indicating each fuse and its amperage to ensure correct replacement. It also sh…
Replacing the Cabin Heater Radiator on a Citroen C4 Picasso
Replacing the Cabin Heater Radiator on a Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) The instructions in this guide will illustrate the procedure for disassembling and replacing the cabin heater radiator on a Citroen C4 Picasso. To ac…
How to Open the Stuck Boot of the Citroen C4 Grand Picasso
How to Open the Stuck Boot of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Briefly follow these instructions to manually open the stuck boot of the Citroen C4 Picasso and C4 Grand Picasso. First, open the rear door and recli…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos