Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cabin filter of the Citroën C4 Picasso?

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Cabin air filter

In order to replace the cabin filter of the Citroën C4 Picasso, you need to remove the screws and rivets that secure the panels around the driver's side pedal area. Once these trim panels are completely removed, you can detach them and locate the filter box on the right side. After loosening the screws holding the cover of the box, you can remove it and slide out the filter from its housing to insert the new one; after replacement, you will need to cover everything again with the panels.

Posted on 2 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on the Citroën C4 Picasso?
How to Replace the Cabin Filter on the Citroën C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) To replace the cabin filter on the Citroën C4 Picasso, loosen the screws securing the plastic panel located directly under the glove compartment on t…
How to replace the cabin air filter of the Citroen C4 Picasso
How to replace the cabin air filter of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) If you don't know how to replace the cabin air filter in your first generation Citroen C4 Picasso, don't worry because we will explain how to do it b…
How to replace the cabin air filter on a Citroen C4 Picasso
How to replace the cabin air filter on a Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) The instructions in this guide will allow you to remove and replace the cabin air filter on the Citroen C4 Picasso. First, open the front passenger d…

    Frequently Asked Questions

    • C4 Picasso 2013-2022 - Where is the Citroen C4 Grand Picasso pollen filter located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos