Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of a Cupra vehicle remote control

Model: Cupra Cupra Various
Part: Key

In this very useful video tutorial, we will see step by step the procedure to replace the battery (CR2032) of the remote control of a latest generation Cupra vehicle (Leon, Formentor, and Ateca). So let's start the operation by immediately pressing the emergency physical key button and then removing it from its slot as shown in the video, then we use the key just removed to leverage the back cover of the remote control to remove it. Once this is done, with the help of a small screwdriver, we can remove the old battery and replace it with a new one, and finally close everything following the reverse procedure.

Posted on 29 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you change the key battery of a Cupra, Seat, Volkswagen car?
How do you change the key battery of a Cupra, Seat, Volkswagen car?
Cupra Cupra Various In this video, we can see how to change the battery of a Cupra car remote control; but the same procedure is also valid for Seat and Volkswagen cars.…
How do you change the key battery of a Cupra car?
How do you change the key battery of a Cupra car?
Cupra Cupra Various In this video we see how to change the battery of a Cupra brand car: on the chrome outer part, we have a small button. If we press it while pulling t…
How to replace the battery of a Cupra key
How to replace the battery of a Cupra key
Cupra Cupra Various In today's video, we can see how to replace the battery (CR2032) of the key for a latest generation Cupra vehicle (Ateca, Leon, Formentor). The opera…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos