Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light in a Cupra Formentor?

Model: Cupra Formentor MK 1 - Years 2020-2026
Part:

In this tutorial, we will see how to reset the tyre warning light in a Cupra Formentor, a very simple and quick operation to perform only after restoring the correct pressure in each tyre as indicated in the manual. First, go inside the cabin, then turn on the instrument panel and navigate to the general menu on the touchscreen display. Next, enter "Vehicle", "Tyres", and perform the reset by selecting the "SET" option. At this point, simply restart the panel and verify that the procedure has been successful.

Posted on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Cupra Formentor
How to reset the tire pressure warning light on the Cupra Formentor
Cupra Formentor (2020-2026 / MK 1) Today we will see the step-by-step instructions that will allow us to reset the tire pressure warning light (TPMS) of the Cupra Formentor; before per…
How do you reset the tire pressure warning light of the Cupra Formentor?
How do you reset the tire pressure warning light of the Cupra Formentor?
Cupra Formentor (2020-2026 / MK 1) In order to reset the tire pressure warning light on the Cupra Formentor, you first need to inflate the tires until they reach the correct pressure v…
How to reset the service in the Cupra Formentor?
How to reset the service in the Cupra Formentor?
Cupra Formentor (2020-2026 / MK 1) In this tutorial we can see how to reset the service in the Cupra Formentor, an extremely simple and quick operation, to be carried out only after co…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos