Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Window Regulator Fuse on a Dacia Sandero?

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Fuse box

See other generations:
Video tutorial

The fuse for the front window regulator of a Dacia Sandero mk2 is located inside the fuse box behind the left dashboard side panel. The fuse in question is labelled F1 and is 30 Amps. To replace the fuse, remove the panel and then take out the damaged fuse to insert the new one. Close the box and test the operation of the left and right front windows.

If the fuse is not the issue, it may be necessary to replace the internal connector of the motor.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of the Dacia Sandero?
How to Remove the Door Panel of the Dacia Sandero?
Dacia Sandero (2012-2020 / B8) To remove the door panel of the Dacia Sandero, loosen the corresponding fastening screws so that the panel can be completely freed from its housing: …
Removing the Door Panel of the Dacia Sandero
Removing the Door Panel of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) Today, discover the procedure for removing and replacing the front door panel of the Dacia Sandero. First, open the door and start by removing the pl…
How to Remove the Door Panel of a Dacia Sandero?
How to Remove the Door Panel of a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) Before you begin, open the door of your Dacia Sandero. Start by prising off and removing the window switch, simply by extracting the internal retaini…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos