Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of a 2DIN car stereo in a Dacia Duster

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

See other generations:
Video tutorial

In this video, we see how to install a 2DIN car radio on a Dacia Duster: we start by removing the plastic frame around the factory radio, which is held in place by pressure. This exposes the four screws that secure the radio to the central console structure, we disconnect the electrical connectors and antenna, and connect the new radio that we have purchased from the countless offers on the market; the one in the video has a 9-inch screen.

For the reverse camera, it was necessary to use the canbus and we ran the camera cables through the door pillars to the trunk for the placement of the camera.


Posted on 25 August 2025 by ScegliAuto


Related tutorials

How to Remove the Stereo from a Dacia Duster
How to Remove the Stereo from a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Learn how to remove the original radio located in the dashboard of a Dacia Duster. Remove the plastic trim at the front of the dashboard (using a lev…
How to Enter the Radio Code on a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) In this video, we will see how to enter the radio code on a Dacia Duster after removing the battery or replacing the stereo. This is a very simple op…
How to Find and Enter the Radio Code for the Dacia Duster
How to Find and Enter the Radio Code for the Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Let’s briefly go through the instructions that will allow you to find and enter the radio code for the Dacia Duster in simple and quick steps. To fin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos