Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Duster
    4. : How to replace headlight bulbs on Dacia Duster

Dacia Duster - Video tutorial

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Interior lights ceiling light bulb
Operation: How to replace headlight bulbs on Dacia Duster

Let's see how to remove the headlight bulbs on a Dacia Duster: open the front hood by pulling the lever located at the bottom right of the dashboard, let's secure it with the rod. We find the inspection cap of the headlight (located at the rear of the headlight) and remove it. Once here, we will find the bulbs with metal hooks; we take out the lamp holders from the headlight and we go to extract the damaged bulbs with the help of a screwdriver. We assemble the new bulbs and (always suitable type and size) we insert the lamp holder in the lighthouse housing. We reassemble all the previously disassembled pieces.


Posted on 5 November 2023 by ScegliAuto



How to replace the bulbs on the Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Let's see how to replace the headlight bulbs of the Dacia Duster. We open the front hood by pulling the lever located at the bottom right of the dash
Disassembly of the headlight of the Dacia Duster MK1
Dacia Duster (2010-2017 / HS, MK 1) In this video we will see the steps on how to remove and replace the headlights on the Dacia Duster first series. First we open the bonnet and start
Removing the headlight bulbs on a Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Let's see the disassembly of the headlight bulbs on Dacia Duster. We open the front hood by pulling the lever located at the bottom right of the dash

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos