Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dacia Sandero Sat Nav

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
Video tutorial

Want to remove the sat nav from your Dacia Sandero but not sure how? Here’s how to take out the original sat nav: Remove the stereo trim frame using a plastic lever (where the air vents are) and detach it from the centre console. Once the stereo is free from constraints, unscrew the securing screws on either side with a screwdriver.

Pull the stereo out by hand and disconnect the cables (power and antenna). To reassemble, follow the disassembly steps in reverse.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to Install a Sat Nav on Dacia Sandero
How to Install a Sat Nav on Dacia Sandero
Dacia Sandero (2008-2012 / BS) Want to install a sat nav on a Dacia Sandero? Let's remove the radio from the centre console. Remove the stereo trim with a plastic lever (under wher…
How to Remove the Original Stereo/Navigator from Our Dacia Sandero
How to Remove the Original Stereo/Navigator from Our Dacia Sandero
Dacia Sandero (2008-2012 / BS) How do you remove the original stereo/navigator from our Dacia Sandero? Follow these steps for proper removal: using a thin screwdriver or plastic le…
How to deactivate the navigation system of the Dacia Sandero
How to deactivate the navigation system of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) If after setting the route on our navigator we decide to change the route or delete the route, it is not necessary to turn off the radio or turn off …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos