Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Original Stereo/Navigator from Our Dacia Sandero

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
Video tutorial

How do you remove the original stereo/navigator from our Dacia Sandero? Follow these steps for proper removal: using a thin screwdriver or plastic lever, pry between the navigator trim and the dashboard (as shown in the video). Remove the plastic frame from the dashboard that was previously detached, then unscrew the screws with a screwdriver with a bit. Disconnect the stereo/navigator from the dashboard, unplug the various power connectors located at the back.

Pull the unit out of its housing. To reassemble the various removed parts, proceed in reverse order.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

How to deactivate the navigation system of the Dacia Sandero
How to deactivate the navigation system of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) If after setting the route on our navigator we decide to change the route or delete the route, it is not necessary to turn off the radio or turn off …
How to Remove the Original Radio from a Dacia Sandero
How to Remove the Original Radio from a Dacia Sandero
Dacia Sandero (2012-2020 / B8) In this video, the YouTuber explains how to remove the original radio from a 2022 Dacia Sandero. To access the unit, first remove the glove compartme…
How to Reset the Service Light on a Dacia Sandero?
How to Reset the Service Light on a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) To reset the service light on a Dacia Sandero, there is no procedure that can be performed from the menu on the instrument panel: you will need to co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos