Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Dacia Sandero?

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Dacia Sandero, there is no procedure that can be performed from the menu on the instrument panel: you will need to connect a diagnostic tool to the vehicle's OBD port. This port is located inside the glove compartment on the passenger side: once the tool is connected, select the car model and the relevant version to proceed with the reset of the light.

After the reset is complete, disconnect the tool and verify that the light has turned off.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Dacia Sandero Stepway?
How to reset the service light on the Dacia Sandero Stepway?
Dacia Sandero (2012-2020 / B8) This video guide explains how to reset the service light on the Dacia Sandero Stepway. First, remember to turn on the instrument cluster. Then, follo…
How do you reset the Service light on the Dacia Sandero?
How do you reset the Service light on the Dacia Sandero?
Dacia Sandero (2012-2020 / B8) To reset the Service light of the Dacia Sandero, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: …
How to Reset the "Service" Light on a Dacia Sandero Stepway
How to Reset the "Service" Light on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero Stepway. Start by repeatedly pressing the button located at the end of the right ind…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos