Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Maintenance Indicator on a Dacia Sandero

Model: Dacia Sandero BS - Years 2008-2012
Part: Warning light – error code

Learn how to reset the maintenance indicator on a Dacia Sandero. This operation is very simple. Enter the vehicle, put it in neutral, and turn on the ignition; within ten seconds of turning it on, press the accelerator pedal and then the brake pedal three times. Release both pedals at the same time after the third brake. Finally, turn off the ignition and check the settings made. The radio display will show the mileage until the next oil change service. Always remember to make modifications with the vehicle stationary and turned off.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2012-2020 / B8) Let’s go through the step-by-step instructions to reset the service light for the routine maintenance oil change on a second-generation Dacia Sandero…
Dacia Sandero (2008-2012 / BS) Below you will find the description of all the various steps you need to follow if you want to manually reset the service light of your Dacia Sandero…
Dacia Sandero (2008-2012 / BS) How to reset the service light on a Dacia Sandero? This operation is very simple: enter the vehicle, turn on the instrument cluster with the appropri…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where to find the Dacia Sandero car radio code? Read answer
    • Sandero 2021-2028 - What does the error code DF003 mean in the Dacia Sandero? Read answer
    • Sandero 2021-2028 - What is the authentication code of the Dacia Sandero Stepway for? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos