Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Dacia Sandero - Dokker - Logan

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Service warning light

See other generations:
Video tutorial

Let’s go through the step-by-step instructions to reset the service light for the routine maintenance oil change on a second-generation Dacia Sandero, as well as on the Dokker and Logan. First, get inside the vehicle and turn the ignition on by turning the key to position one; then, scroll using the button on the right lever (with the arrow) until you reach the maintenance light.

At this point, press and hold the button until the light starts to flash and the maintenance light turns off, as shown in the video!


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Dacia Sandero - Logan
How to Reset the Tyre Pressure Warning Light on the Dacia Sandero - Logan
Dacia Sandero (2012-2020 / B8) .. light on the Dacia Sandero, as well as the Logan. Before performing the reset, ensure that all four tyres are at the correct operating pressure... …
Removing the Radio from a Dacia Sandero MK2 - Logan MK2
Removing the Radio from a Dacia Sandero MK2 - Logan MK2
Dacia Sandero (2012-2020 / B8) .. second series Dacia Sandero, as well as from the Logan. First, get inside the car and remove the front plastic trim by gently prying at the sides; once.. …
How to Program the Automatic Door Locking on Dacia Sandero (and Logan and Lodgy)
How to Program the Automatic Door Locking on Dacia Sandero (and Logan and Lodgy)
Dacia Sandero (2021-2026 / MK 3) .. the doors on Dacia vehicles, whether Sandero, Logan, or Lodgy, simply press the lock button located on the dashboard between the two air vents, holding.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos