Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a Dacia Sandero MK2 - Logan MK2

Model: Dacia Sandero B8 - Years 2012-2020
Part: Car stereo

In this video tutorial, you will learn how to remove the radio or multimedia system from a second series Dacia Sandero, as well as from the Logan. First, get inside the car and remove the front plastic trim by gently prying at the sides; once the panel is removed, disconnect the electrical connector for the hazard light button. Next, using a Torx screwdriver, unscrew the four screws securing the multimedia system to remove it; then simply pull out the radio and disconnect the various cables at the back!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Dacia Sandero - Logan
How to Reset the Tyre Pressure Warning Light on the Dacia Sandero - Logan
Dacia Sandero (2012-2020 / B8) This brief and simple guide provides instructions on how to reset the tyre pressure warning light on the Dacia Sandero, as well as the Logan. Before …
How to Reset the Service Light on Dacia Sandero - Dokker - Logan
How to Reset the Service Light on Dacia Sandero - Dokker - Logan
Dacia Sandero (2012-2020 / B8) Let’s go through the step-by-step instructions to reset the service light for the routine maintenance oil change on a second-generation Dacia Sandero…
How to adjust the clock in the instrument panel of the Dacia Sandero and Renault Logan
How to adjust the clock in the instrument panel of the Dacia Sandero and Renault Logan
Dacia Sandero (2008-2012 / BS) Today we will explain how to adjust the clock on the instrument panel of Dacia Sandero and Renault Logan vehicles. To adjust the time, we need to tur…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos