Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Standard Radio of the Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Car stereo

See other generations:
Video tutorial

Below are the instructions to remove and replace the standard radio of the Dacia Sandero, as well as the Duster and Logan. First, get inside the vehicle and pry off the plastic side cover to detach and remove it; then unscrew the four fixing screws on the side, disconnecting the electrical connectors located at the back of the radio, as shown in the video.

At this point, install the new Android multimedia system compatible with the vehicle, following the video tutorial to the end!


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to Replace the Original Radio on a Dacia Sandero
How to Replace the Original Radio on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) How to replace the original radio on a Dacia Sandero? Follow these steps carefully. Use the original or aftermarket metal keys to remove the car ster…
How to Remove the Dacia Sandero Sat Nav
How to Remove the Dacia Sandero Sat Nav
Dacia Sandero (2008-2012 / BS) Want to remove the sat nav from your Dacia Sandero but not sure how? Here’s how to take out the original sat nav: Remove the stereo trim frame using …
How to Remove the Original Radio from a Dacia Sandero
How to Remove the Original Radio from a Dacia Sandero
Dacia Sandero (2012-2020 / B8) In this video, the YouTuber explains how to remove the original radio from a 2022 Dacia Sandero. To access the unit, first remove the glove compartme…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos