Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on the Dacia Sandero

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Tail light bulb

See other generations:
Video tutorial

Today, you will learn how to replace the rear light bulbs on the Dacia Sandero model 2. To replace the bulbs, open the boot and remove the plastic cover holding the rear light. Unscrew the screw and disconnect the light from the connector.

Pull out the light and remove the lens. Unscrew the bulbs inside the lens to remove and replace them.

Insert the new bulbs and reassemble the lens. Connect the light to the connector and place the light back in its housing.

Tighten the plastic screw to secure the light and repeat the same steps to replace the bulb in the right rear light.


Posted on 12 February 2026 by ScegliAuto


Related tutorials

How to replace the bulb and the third brake light of the Dacia Sandero
How to replace the bulb and the third brake light of the Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) Today we will see the instructions that will allow us to disassemble and replace the bulbs and the third brake light of the Dacia Sandero. First of a…
Removing the Front Headlamp Bulbs on a Dacia Sandero
Removing the Front Headlamp Bulbs on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) Learn how to remove the bulbs fitted in the front headlamp on a Dacia Sandero. Open the bonnet by pulling the lever located at the bottom right of th…
How to Replace the Front Headlamp Bulbs on a Dacia Sandero
How to Replace the Front Headlamp Bulbs on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) Open the bonnet by pulling the lever located at the bottom left of the dashboard, and secure it with the prop rod. Locate the inspection cap of the h…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos