Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlight and Replace the Bulbs on a Dacia Sandero

Model: Dacia Sandero BS - Years 2008-2012
Part: Tail light bulb

Are the rear headlight lights on your Dacia Sandero not working anymore? Follow these steps to remove the headlight and replace the bulbs: open the boot lid, remove the plastic cover on the side of the trim (unscrew the securing plastic bolt). Once the plastic cover is unscrewed, remove the securing plastic pins. Disconnect the rear headlight from its housing and replace the damaged bulbs with new ones (same size and voltage). Finally, reassemble the headlight with the securing pins and replace the plastic cover on the trim. Test the correct operation of the bulbs.

Updated on 9 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Headlight Bulbs on a Dacia Sandero
How to Change the Headlight Bulbs on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) How to replace the headlight bulbs on a Dacia Sandero? Follow these steps in the instructional video. Open the bonnet by pulling the lever located at…
How to Replace the Front Headlight Bulbs on the Dacia Sandero 1
How to Replace the Front Headlight Bulbs on the Dacia Sandero 1
Dacia Sandero (2008-2012 / BS) Discover in this video how to dismantle and replace all the bulbs of the front headlight on the first series Dacia Sandero in simple steps. First, op…
How to Replace the Front Headlight Bulb on Dacia Sandero Stepway?
How to Replace the Front Headlight Bulb on Dacia Sandero Stepway?
Dacia Sandero (2012-2020 / B8) To replace the front headlight bulb on the Dacia Sandero Stepway, open the bonnet to access the engine compartment. Next, remove the protective cap f…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos