|
Do it yourself
| |||
| ||||
How to Replace the Heated Seat Fuse Relays on the Dacia Duster
Model: Dacia Duster
P1310
- Years:
2024, 2025, 2026
Video tutorial
Learn how to replace the fuses and test the heated seat relays on the Dacia Duster. This fuse is located inside the fuse box in the cabin, on the driver's side, behind the plastic cover at the bottom left of the steering wheel. The fuse of interest is F16, rated at 15 Amps. To test the fuse, turn on the ignition and connect the probe of the test lamp to a ground; touch both metal contacts on the top of the fuse with the probe. If both contacts light up the lamp, the fuse is good; otherwise, it needs replacing. If it is a transparent fuse, you can see if the metal wire inside is broken, indicating that the fuse has blown. In the video, a relay tester is used: if the light flashes green, the relay is functioning; if it flashes red or does not flash, the relay is faulty. Without a specific tester, you can test it by swapping it with an identical one from a secondary circuit and check if the problem moves. If the fuse blows again, there is a more serious issue, such as a short circuit in the wiring or components, a fault in the relay, or a problem with the heated seat system itself.
Posted on 26 March 2026 by ScegliAuto
Related tutorials
Dacia Duster
(2017-2024 /
HM, MK 2)
Today's instructions will show you how to access the internal fuse box of the Dacia Duster in simple and quick steps. First, get into the vehicle on …
Dacia Duster
(2017-2024 /
HM, MK 2)
Today's steps will allow us to access the internal fuse box of the Dacia Duster, also finding the diagram and schematic. First, we get into the car, …
Dacia Duster
(2010-2017 /
MK 1, HS)
In this useful guide today, you will find all the fuse diagrams present within a Dacia Duster, first series model produced from 2010 to 2017. In the …
Other guides you may be interested in
|
How to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.126
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |