Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the TPMS Light on the Dacia Logan

Model: Dacia Logan MK 1 - Years 2004-2012
Part:

If the tyre pressure warning light remains illuminated on the small display of your Dacia Logan even without a puncture, you need to manually reset the light. First, get into the driver's seat and start the ignition if it is still off, then press the lower button on the right steering column multiple times and ensure that "Set TP" is displayed on the screen. At this point, simply hold down the same button used previously until the display stops flashing.

Posted on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Logan (2012-2022 / MK 2) If the tyre warning light on your Dacia Logan dashboard illuminates despite none of the tyres being flat or losing pressure, you must perform a manua…
Dacia Logan (2004-2012 / MK 1) If you notice a warning message about low tyre pressure when starting your Dacia Logan, don’t worry as it is often just a sensor reading error. A man…
Dacia Logan (2012-2022 / MK 2) Below is the procedure necessary to reset the service light for the routine maintenance of the engine oil change on the Dacia Logan, as well as the S…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos