Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure on the Dacia Sandero Stepway

Model: Dacia Sandero MK 3 - Years 2021-2026
Part:

To reset the TPMS warning light on the Dacia Sandero Stepway, first inflate all four tyres to the correct pressure, as indicated on the label inside the driver's door. Then, get in, turn on the ignition (position 'ON', without starting the engine). On the right side of the dashboard, locate the adjustment button and the arrow buttons. Press the button until 'TP' (Tyre Pressure) appears on the display. Hold the button for about 3 seconds until 'TP' starts to flash. Release the button. Turn off the ignition and turn it back on. The TPMS warning light will turn off and the system will begin recalibrating the pressure while driving. This procedure is valid for most Dacia models.

Posted on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Dacia Sandero Stepway
How to Reset the "Service" Light on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero Stepway. Start by repeatedly pressing the button located at the end of the right ind…
How to Reset the Service Light on the Dacia Sandero Stepway 2022
How to Reset the Service Light on the Dacia Sandero Stepway 2022
Dacia Sandero (2021-2026 / MK 3) In this new guide for your Dacia Sandero Stepway Mk3 (2022), you will learn how to manually reset the service light. With this guide, you can complet…
How to Reset the Tyre Pressure Light in a Dacia Sandero Stepway
How to Reset the Tyre Pressure Light in a Dacia Sandero Stepway
Dacia Sandero (2021-2026 / MK 3) In today's video, you will see how to reset the tyre pressure light in a Dacia Sandero Stepway. This tutorial also applies to other models in the Rom…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos