Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : How to restore the tire pressure indicator in the Dacia Sandero Stepway.

Dacia Sandero - Video tutorial

Model: Dacia Sandero MK 3 - Years 2021-2024
Part: Tires
Operation: How to restore the tire pressure indicator in the Dacia Sandero Stepway.

In today's video, we will see how to reset the tire pressure warning light in the Dacia Sandero Stepway. This tutorial also applies to other models in the Romanian manufacturer's range. First, let's check the pressure of all four tires and, if necessary, adjust it to the correct value. Now, let's go inside the car and start the engine. Navigate through the onboard computer until you find the corresponding parameter. Select it and confirm the reset. After a few seconds, your car will store the newly set parameter.


Posted on 29 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Sandero 2012-2020 - What does the orange light with an exclamation mark in the center mean in the Dacia Sandero? Read Answer
    • Sandero 2021-2028 - What to do if the tire warning light comes on on the Dacia Sandero? Read Answer
    • Sandero 2012-2020 - What does the warning light with an exclamation point in a tire mean in the Dacia Sandero? Read Answer
    • Sandero 2008-2012 - How does the tire warning light work on Dacia Sandero? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos