Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Dacia Sandero

Model: Dacia Sandero B8 - Years 2012-2020
Part: Air filter

Before you start, open the engine bonnet. Begin by unclipping the two clips securing the upper cover of the air filter, using a small flat screwdriver if necessary to pry them off, though it is also possible to unclip them by hand. Once the clips are unclipped, remove the upper cover to access the air filter. To remove the air filter, simply pull it out of its housing, completing the disassembly. To install the new air filter and close the air filter housing, just follow these steps in reverse, and you will have successfully completed the replacement.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Dacia Sandero
How to replace the air filter of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) When the engine of your Dacia Sandero overheats abnormally even at low speeds, it is very likely that it is time to replace the appropriate air filte…
How to Replace the Engine Air Filter on a Dacia Sandero
How to Replace the Engine Air Filter on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) How to replace the engine air filter on a Dacia Sandero? Follow this procedure: open the car door, pull up the engine compartment release lever locat…
How to Replace the Air Filter of a Dacia Sandero
How to Replace the Air Filter of a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before starting, open the bonnet of your Dacia Sandero. Begin by disconnecting the air filter housing hoses by loosening the screws that secure the m…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos