Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : Remove the Dacia Logan door

Dacia Logan - Video tutorial

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Door panel
Operation: Remove the Dacia Logan door

Let's see how to remove the cover panel of a Dacia Logan. We open the door, find the tightening screws inside the cover panel. We remove the crank of the manual window lifter, then, with a screwdriver, we go to unscrew the tightening screws placed inside the internal handle and inside the space of the door opening lever. Once all the screws have been removed, with the lever we remove all the plastic clips that block the door. We detach the door panel with our hands, unhook any power supply terminals and release cable. Let's do a parts cleaning before mounting the door panel.


Posted on 15 January 2024 by ScegliAuto



How to replace the cabin filter in the Dacia Logan?
Dacia Logan (2004-2012 / MK 1) As we can see in this tutorial, replacing the cabin air filter in the Dacia Logan is an extremely simple and fast operation. First of all, let's posi
Assembly and disassembly of the door panel of a Dacia Logan
Dacia Logan (2004-2012 / MK 1) Removing and removing the door panel of a Dacia Logan? Let's see how it dismounts from the door. With a lever or screwdriver we go to pry the plastic
How to remove the door panel of the Dacia Logan
Dacia Logan (2012-2022 / MK 2) Today we will see the steps that will allow us to disassemble and replace the front door panel of the Dacia Logan, following the instructions below.

Other guides that may interest you

    Frequently Asked Questions

    • Logan 2012-2022 - How to remove the door panel of a Dacia Logan? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos