Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of a Dacia Logan

Model: Dacia Logan MK 1 - Years 2004-2012
Part: Door trim panel

Today, in this video tutorial, see how to remove the door panel of a first series Dacia Logan. First, open the door and start by removing the window lift handle by pulling it towards you: unscrew the grab handle screw and the screw found in the opening handle. Remove the handle trim and disconnect the steel cable; finally, take off the lock cover. At this point, you can unclip the panel: prise it from the sides applying some force and pull the panel towards you. This way, you should be able to unclip it!

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front door panel of the Dacia Logan
How to disassemble the front door panel of the Dacia Logan
Dacia Logan (2012-2022 / MK 2) In these short and simple steps, we will see how to disassemble the front door panel of the Dacia Logan. First, open the front door of the car and st…
Removing and Fitting the Door Panel on a Dacia Logan
Removing and Fitting the Door Panel on a Dacia Logan
Dacia Logan (2004-2012 / MK 1) Need to remove and fit the door panel on a Dacia Logan? Here’s how to take it off the door. Use a lever or screwdriver to pry off the plastic coverin…
Disassembly of the rear door panel of the Dacia Logan
Disassembly of the rear door panel of the Dacia Logan
Dacia Logan (2004-2012 / MK 1) Today we will see the instructions that will allow us to disassemble and remove the rear door panel of the Dacia Logan, in simple steps. First, we op…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos