Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : How to remove the door panel of the Dacia Logan

Dacia Logan - Video tutorial

Model: Dacia Logan MK 2 - Years 2012-2022
Part: Door panel
Operation: How to remove the door panel of the Dacia Logan

Today we will see the steps that will allow us to disassemble and replace the front door panel of the Dacia Logan, following the instructions below. First of all, we open the front door and begin to remove the triangular plastic cover, levering the sides; after which we remove the plastic cover of the handle, unscrewing the screws that we find below, as shown in the video. At this point we unscrew all the fixing screws of the door panel to detach it on the sides, until it is completely removed; finally disconnect the cable of the opening handle!


Posted on 20 May 2024 by ScegliAuto



Assembly and disassembly of the door panel of a Dacia Logan
Dacia Logan (2004-2012 / MK 1) Removing and removing the door panel of a Dacia Logan? Let's see how it dismounts from the door. With a lever or screwdriver we go to pry the plastic
Remove the Dacia Logan door
Dacia Logan (2004-2012 / MK 1) Let's see how to remove the cover panel of a Dacia Logan. We open the door, find the tightening screws inside the cover panel. We remove the crank of
Removing the Dacia Logan door panel
Dacia Logan (2004-2012 / MK 1) Today we will see in this video tutorial how to remove the door panel of a Dacia Logan Prima series. First we open the door and start by removing the

    Frequently Asked Questions

    • Logan 2012-2022 - How to remove the door panel of a Dacia Logan? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos