Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light of a Dacia Duster

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light

See other generations:
Video tutorial

In this video, you will learn how to remove the rear lights of a first-generation Dacia Duster, as well as how to take off the rear bumper. First, open the boot and unscrew the rear plastic screws of the light unit: then pull the light out from the outside and disconnect the electrical connector of the bulbs, as shown in the video.

At this point, perform the same operation with the other light and replace the bulbs if desired. Next, the removal of the bumper is illustrated; apply the reverse procedure for reassembly!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to replace the rear light of the Dacia Duster
How to replace the rear light of the Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) These short and simple steps will show us how to disassemble and replace the rear headlight bulbs and its bulbs of the Dacia Duster. First, we open t…
Removing the Headlight Bulbs on a Dacia Duster
Removing the Headlight Bulbs on a Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) This guide covers the removal of the headlight bulbs on a Dacia Duster. Open the front bonnet by pulling the lever located at the bottom right of the…
Removing the Front Headlight of the Dacia Duster MK1
Removing the Front Headlight of the Dacia Duster MK1
Dacia Duster (2010-2017 / MK 1, HS) In this video, you will see the steps to remove and replace the front headlights on the first series Dacia Duster. First, open the bonnet and start b…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos