Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of a Dacia Duster

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Rear bumper

See other generations:
Video tutorial

Do you want to replace the rear bumper of your Dacia Duster? Here’s how to remove the bumper from the rear of the car. Lift the tailgate to access the securing screws and the back of the lights. Unscrew the securing bolts located at the rear of the light units (after removing the inspection caps), then remove them after disconnecting the power connectors.

Unscrew the screws located at the bottom of the bumper, then remove the screws located at the sides of the wheel arch liners. Once the bumper is free from any screws or bolts, grasp it with your hands and pull it away from the rear of the Duster.

Fit a new rear bumper.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Removing the Rear Light of a Dacia Duster
Removing the Rear Light of a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) In this video, you will learn how to remove the rear lights of a first-generation Dacia Duster, as well as how to take off the rear bumper. First, op…
How to Remove the Front Wheel of a Dacia Duster
How to Remove the Front Wheel of a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Before you can begin, exit the cabin of your Dacia Duster. Start by retrieving the jack located in the boot, then position it under the outer lower s…
How to Reset the "Service" Light on a Dacia Duster
How to Reset the "Service" Light on a Dacia Duster
Dacia Duster (2010-2017 / MK 1, HS) Before you can start, sit in the driver's seat of your Dacia Duster. Begin by activating the instrument cluster by simply turning the key in the igni…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos