Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Wheel of a Dacia Duster

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Wheel

Before you can begin, exit the cabin of your Dacia Duster. Start by retrieving the jack located in the boot, then position it under the outer lower sill and raise it. This will lift the side of the vehicle. Next, unscrew and remove the bolts that secure the front wheel to the hub. At this point, disengage and slide the wheel off the hub. Once you have removed the front wheel from your Dacia Duster, you have successfully completed the disassembly, and you can fit the new wheel.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Disc on a Dacia Duster?
How to Replace the Front Brake Disc on a Dacia Duster?
Dacia Duster (2010-2017 / HS, MK 1) To replace the front brake disc on a Dacia Duster, lift the car to access the bolts securing the corresponding front wheel. Once this wheel is remove…
Guide to replacing the timing belt on the Dacia Duster 1.5 dCi
Guide to replacing the timing belt on the Dacia Duster 1.5 dCi
Dacia Duster (2010-2017 / HS, MK 1) Here are the main steps to remove and replace the timing belt on the Dacia Duster 1.5 dCi. First, raise the vehicle and remove the front right wheel …
Replacing Front Brake Pads and Disc on Dacia Duster
Replacing Front Brake Pads and Disc on Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) This video shows how to remove and replace the front brake pads and disc on a first series Dacia Duster. First, remove the front wheel by taking off …

    Frequently Asked Questions

    • Duster 2017-2024 - Where is the spare wheel located in the Dacia Duster? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos