Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Duster
    4. : How do you replace the front brake disc on your Dacia Duster?

Dacia Duster - Video tutorial

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Brake discs
Operation: How do you replace the front brake disc on your Dacia Duster?

To be able to replace the front brake disc on your Dacia Duster you have to go and lift the car, so that you can unscrew the screws that hold the corresponding front wheel. When this wheel has been removed, it will be possible to access the underlying components: in particular, the screws that fix the brake caliper will have to be loosened, removing it completely. At this point you can unscrew the bolts that fix the disc to the relevant wheel hub, so that it can be replaced with a new spare part. Now the brake caliper and the corresponding wheel can be installed again.


Posted on 23 December 2022 by ScegliAuto



Replacement brake pads and front disc Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) In this video we will see how to remove and replace the front brake pads and the disc of a first series Dacia Duster. First we disassemble the front
Removing the brake pads on Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Are the front brake pads worn out? Let's see how they disassemble on a Dacia Duster. We jack the car up to a comfortable height to intervene. We unsc
How to replace the front brake pads on the Dacia Duster?
Dacia Duster (2010-2017 / HS, MK 1) In this tutorial, we can see how to replace the front brake pads in the Dacia Duster, a simple operation but one that requires good manual dexterity.

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos